Table 6
might be taken for each.
Figure 43. Health & Status Indicator
NOTE
Table 6. Error Code Table
Health &
Probable Cause
Status
Indicator
Configuration Error
Host Interface
Main Board
Reserved
ScaleSentry Error
Interface Board
Product Reference Guide
describes what the FRU indication codes in step 2 mean, and what corrective action
When troubleshooting, always remember to check all cable connec-
tions first before proceeding with other problem isolation steps.
Make sure the correct interface is selected, then scan the factory defaults
bar code and reset the unit. Also, see
about configuring the scanner using programming bar codes.
Unplug unit and call technical support personnel.
Chapter 7,
See
for this optional feature, which may not have been purchased for your
scanner.
Unplug unit and call technical support personnel.
Corrective Action
Chapter 7,
Programming, for details about configuring the scanner
Programming, for details
65