PDF 417 Enable
Enablesthe processing of PDF417 labels read by a handheld scanner attached to the auxiliary
port.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
05A101(CR)
PDF 417 = Enable
Product Reference Guide
Enter/Exit Programming Mode
05A100(CR)
PDF 417 = Disable
DEFAULT
371