Stitch Unlike Label Halves - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode
EAN-8 Stitch Unlike Label Halves
This setting enables the stitching of two EAN-8 label halves together that may have different
characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
054501(CR)
EAN-8 Stitch Unlike Label Halves = Enable
260
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
code.
054500(CR)
EAN-8 Stitch Unlike Label Halves = Disable
Magellan™ 9800i Scanner