Standard 2 Of 5 Length 2 - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Length 2

If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies
Standard 2 of 5 second fixed length. If Standard 2of 5 Length Control is set to Variable-Length
decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
364
When in Fixed Length mode, if Length 2 is set to the value of 00 (zero),
then only Length 1 will apply.
NOTE
Set Standard 2 of 5 Length 2
barcodes on this and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
label length. The selectable range for this option is 1 to 50. Pad all single digit numbers
with a leading zero to yield a two-digit entry (01-50).
Mode bar code.
below. You'll need to cover any unused
Keypad Appendix C
in
0499(CR)
Set Standard 2 of 5 Length 2
Default setting for this feature = 50
that represent the desired
Magellan™ 9800i Scanner