Enter/Exit Programming Mode
UPC/EAN Minimum Segment Length
This feature specifies the minimum number of characters needed in a UPC/EAN segment in
order to be accepted for decoding.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code for the desired setting below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
048F06(CR)
UPC/EAN Minimum Segment Length = 6 Characters
048F08(CR)
UPC/EAN Minimum Segment Length = 8 Characters
268
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
code.
048F05(CR)
UPC/EAN Minimum Segment Length = 5 Characters
048F07(CR)
UPC/EAN Minimum Segment Length = 7 Characters
048F09(CR)
UPC/EAN Minimum Segment Length = 9 Characters
Magellan™ 9800i Scanner