Enter/Exit Programming Mode
Interleaved 2 of 5 (I 2 OF 5) Enable
Enables/disables the ability of the scanner to decode Interleaved 2 of 5 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
009001(CR)
I 2 of 5 = Enable
318
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
009000(CR)
I 2 of 5 = Disable
Magellan™ 9800i Scanner