Scalesentry / Scale Service Button - Datalogic Magellan 9800i Product Reference Manual

Table 17. EAS Indications
Deactivation
Indicated
Deactivation
Indicated
a.
b.

ScaleSentry / Scale Service Button

The ScaleSentry / Scale Service Button (item #3 in
listed in
Table 18. ScaleSentry / Scale Service Button Functions
PRESS
DURATION
Momentary
4 Seconds
8 Seconds
Momentary while
in Scale
Diagnostics Mode
a.
394
Deactivation (Tri-color) LED
flashes Red.
Deactivation (Tri-color) LED
flashes Red, then Orange, then
returns to Green.
Additionally, the FRU LED (Health & Status Indicator located in the bottom of the
optic cavity — visible through the horizontal scan window) blinks the number '9'. If
EAS deactivation fails to initiate, a low, error tone will be sounded, and the FRU LED
will display the error code '9' steadily (without flashing).
Ticking sound will stop upon one of the following: 1) Manual EAS Deactivation Push
Button is pressed and released again, 2) EAS timer runs out, or 3) Following a suc-
cessful EAS tag deactivation.
Table 18.
FUNCTION
Override
Scale Diagnostics
a
Mode
Resets Scanner
Resets Scanner
Diagnostics Mode is meant for use by trained systems support personnel. Users should
not need to initiate this function under normal circumstances.
DECOUPLED MODE
EAS Beep OFF
HYBRID MODE
High frequency beep
Figure 58) is used for multiple functions as
If a ScaleSentry event is occurring, this will override the scale sentry
event. If no ScaleSentry event is occurring, this will activate the man-
ual tare function of the scale.
This mode allows system support personnel to troubleshoot problems
with the scale. Momentarily press the Scale Zero Button or cycle power
to exit Scale Diagnostics Mode. See the topic,
Problem Isolation
in the section for more details.
Only system support personnel should perform a reset.
A scanner reset can also be initiated by a momentary press of this but-
ton while in Scale Diagnostics Mode.
An EAS tag has been
successfully deacti-
vated.
An EAS tag has been
successfully deacti-
vated.
COMMENT
Scale Error Reporting
Magellan™ 9800i Scanner