Calibration Switch - Datalogic Magellan 9800i Product Reference Manual

Calibration Switch

This switch initiates the scale's calibration routine. A certified weight set is needed to perform
the scale calibration steps detailed in
included in scanners without scale modules.
Calibration Switch Seal
This seal allows you to secure the Calibration Switch access cover and restrict access to the
Calibration Switch. If the calibration seal is broken or missing, you may be prohibited from
operating the scale without recertification. Check local and state requirements for specific
restrictions.
Calibration Switch Cover
This cover restricts access to the Calibration Switch to help guard against unauthorized
tampering when sealed. See
Figure 59. Calibration Switch Cover
398
Figure
There are regulations that must be followed in order to ensure compli-
LEGAL NOTE
ance when operating a weighing device such as the scanner/scale. Fail-
ure to observe and comply with these regulations could result in legal
action.
LEGAL NOTE
A
Chapter 6, Calibration
59.
Procedures. This switch is not
C
B
Magellan™ 9800i Scanner