Datalogic Magellan 9800i Product Reference Manual page 56

Site Preparation and Installation
5. Feed the entire length of the Remote Scale Display interface cable through the cable rout-
6. If present, remove the rubber band from the connector end.
7. Install mounting screws or bolts to complete the installation of the Remote Scale Display.
Figure 29. Remote Scale Display Mounting
(optional
routing)
Figure 30. Remote Scale Display Mounting Template
41.99mm
44
ing hole so that the assembled Remote Scale Display can be positioned over the mounting
screw holes.
Take care not to pinch or pierce the interface cable while securing the Remote Scale Dis-
play to the checkstand.
Dual Display
Heads
Single
Display
Head
cable
Mounting
Example
116.39mm
85.1mm
Magellan™ 9800i Scanner
25.5mm