I 2 Of 5 Length 1 - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Length 1

If I 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies I 2 of 5 first
fixed length. If I 2 of 5 Length Control is set to Variable-Length decoding, this feature specifies
the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
324
Set I 2 of 5 Length 1
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
label length. The selectable range for this option is 02 to 50, even numbers only. Pad all
single digit numbers with a leading zero to yield a two-digit entry (02-50).
Mode bar code.
below. You'll need to cover any unused barcodes
Keypad Appendix C
in
0056(CR)
Set I 2 of 5 Length 1
Default setting for this feature = 06
that represent the desired
Magellan™ 9800i Scanner