Led And Audio Indicators; Arch Indicators - Datalogic Jade X7 Quick Reference Manual

LED and Audio Indicators

The scanning system provides onboard LED indicators (one multi-color "illuminating logo" per arch).
The system may offer additional custom LEDs, audio sounds and other indicators which are unique to
your installation. Be sure to check the documentation for the checkstand and other equipment for fur-
ther information.

Arch Indicators

LED Indicator
(same on both arches)
One LED indicator is located on each arch (Entry and Exit) in the same position on each arch as shown.
See the Table below for a listing of standard factory arch LED indications. The indications are not con-
figurable.
Table 1. Arch LED Status Indicators
DESCRIPTION COLOR PATTERN
Arch Initial Program
Momentary Green (5s) – Off (30s)
Load Event
Cycle Red (.5s) – Green (.5s) –
Startup
Blue (.5s)
Arch Completed
Momentary Green (1s) – Off (.5s)
Selftest Event
Cycle Black (.25s) – Blue (.25s) –
Ready – POS not
Connected
Black (.25s) – Blue (2.25s)
Ready – Reading
Steady Blue
not Enabled
Ready – Reading
Steady Green
Enabled
Cycle Blue (1s) – Off (1s)
Sleep
Cycle Red (2s) – Off (2s)
Fault
Cycle Green (2s) – Off (2s)
Calibration
Cycle Blue (2s) – Green (2s)
Service
Quick Reference Guide
LED and Audio Indicators
7