Enter/Exit Programming Mode
Standard 2 of 5 Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for Standard 2
of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
049701(CR)
Standard 2 of 5 Length Control = Fixed Length
362
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
049700(CR)
Standard 2 of 5 Length Control = Variable Length
Magellan™ 9800i Scanner