Datalogic Magellan 9800i Product Reference Manual page 59

Figure 32. Optional EAS Cable Connections
5. Make sure that all cables are firmly attached (except that the AC/DC power supply should
6. Remove the All Weighs™ Platter to gain access to the lift handles. Lift the top edge of the
Figure 33. Removing the All Weighs™ Platter
7. The scanner provides lift handles that must be rotated up into position for use as shown
Product Reference Guide
To Checkpoint
not be connected to the AC outlet yet).
Figure 33
platter bezel as shown in
the platter is blocked, you may find it easier to grasp edges of the platter as shown by the
arrows.
Figure 34
in . When released, these handles should be allowed to rotate back down into
their seated positions in the cavity. Use reasonable care when attempting to lift the unit
using any features other than the lift handles.
®
EAS System
and gently lift it from the scanner. If the top edge of
To Sensormatic
EAS System
®
47