Fcc Compliance; Eac Compliance; Led Safety; Laser Safety - Datalogic Matrix 300N Series Product Reference Manual

COMPLIANCE
complex systems. For this reason it is under the responsibility of the system integrator
to perform a new risk assessment regarding the final installation.
Warning
This is a Class A product. In a domestic environment this product may cause radio inter-
ference, in which case the user may be required to take adequate measures.

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his/her own expense.

EAC COMPLIANCE

Customs Union:
The CU Conformity certification has been achieved; this allows the Product to bear the
Eurasian Mark of conformity.

LED SAFETY

LED emission according to EN 62471.

LASER SAFETY

The Matrix 300N internal illuminators contain two aiming Laser LEDs used to position
the reader.
This product conforms to the applicable requirements of IEC 60825-1 and complies with
21 CFR 1040.10 except for deviations pursuant to Laser Notice N° 50, date June 24,
2007. This product is classified as a Class 2 laser product according to IEC 60825-1 regu-
lations.
WARNING
x
MATRIX 300N
Use of controls or adjustments or performance of procedures other than
those specified herein may result in exposure to hazardous visible laser
light.