Standard 2 Of 5 Length 1 - Datalogic Magellan 9800i Product Reference Manual

Standard 2 of 5 Length 1

If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies
Standard 2 of 5 first fixed length. If Standard 2of 5 Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
barcodes on this and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 1 to 50. Pad all single digit numbers
with a leading zero to yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Product Reference Guide
Set Standard 2 of 5 Length 1
Keypad
0498(CR)
Enter/Exit Programming Mode
below. You'll need to cover any unused
Appendix C
in that represent the desired
Set Standard 2 of 5 Length 1
Default setting for this feature = 08
363