Msi Length 2 - Datalogic Magellan 9800i Product Reference Manual

MSI Length 2

If MSI Length Control is set to Fixed-Length decoding, this feature specifies MSI second fixed
length. If MSI Length Control is set to Variable-Length decoding, this feature specifies the
maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 00 (meaning ignore this length), or 04
to 16. Pad all single digit numbers with a leading zero to yield a two-digit entry (00, 04-
16).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Length 2 is set to the value 00 (zero),
then only Length 1 will apply.
NOTE
Set MSI Length 2
Enter/Exit Programming Mode
below. You'll need to cover any unused barcodes on
Keypad Appendix C
in
00CC(CR)
Set MSI Length 2
Default setting for this feature = 16
that represent the desired
355