Standard 2 Of 5 Minimum Read - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Minimum Read

This feature specifies the minimum number of consecutive Standard 2 of 5 decodes before is
accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
049502(CR)
Standard 2 of 5 Minimum Read = 2
049504(CR)
Standard 2 of 5 Minimum Read = 4
360
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
Mode bar code.
049501(CR)
Standard 2 of 5 Minimum Read = 1
049503(CR)
Standard 2 of 5 Minimum Read = 3
Magellan™ 9800i Scanner