Code 39 Length 2 - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Code 39 Length 2

If Code 39 Length Control is set to Fixed-Length decoding, this feature specifies Code 39
second fixed length. If Code 39 Length Control is set to Variable-Length decoding, this feature
specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
302
When in Fixed Length mode, if Length 2 is set to the value of 00, then
only Length 1 will apply
NOTE
Set Code 39 Length 2
codes on this and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
label length. The selectable range for this option is 00, no second fixed length, or 01 to
50. Pad all single digit numbers with a leading zero to yield a two-digit entry (00-50).
Mode bar code.
below. You'll need to cover any unused bar-
Keypad Appendix C
in
04B3(CR)
Set Code 39 Length 2
Default setting for this feature = 50
that represent the desired
Magellan™ 9800i Scanner