Enter/Exit Programming Mode
Code 39 Require Margins
Enables/disables the requirement that quiet zones be present in a Code 39 bar code.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
04BA01(CR)
Code 39 Require Margins = Quiet Zones Required
304
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
Mode bar code.
04BA00(CR)
Code 39 Require Margins = Quiet Zones Not Required
Magellan™ 9800i Scanner