Enter/Exit Programming Mode
EAN-13 Minimum Read
This feature specifies the minimum number of consecutive EAN-13 decodes before is accepted
as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
006402(CR)
EAN-13 Minimum Read = 2
006404(CR)
EAN-13 Minimum Read = 4
252
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
Mode bar code.
006401(CR)
EAN-13 Minimum Read = 1
006403(CR)
EAN-13 Minimum Read = 3
Magellan™ 9800i Scanner