EAN8 with Code128 Supplemental
•
Check digit must be included in label data and is assumed to be correct
•
Supplemental data is appended to base label
•
Prefix must be an ASCII characters 'FF' - total length including prefix must be greater
than 16 (code 128 supplemental codes are variable length having a minimum of 2 data
characters)
•
Characters immediately following base label must be of the form '8100', '8101' or
'8102'
•
Example: 'FF002101268102000951'
EAN13
•
Check digit must be included in label data and is assumed to be correct
•
Prefix must be an ASCII character 'F'- total length including prefix must be 14
•
Example: 'F1101234567891'
EAN13 with 2-Digit Supplemental
•
Check digit must be included in label data and is assumed to be correct
•
Supplemental data is appended to base label
•
Prefix must be an ASCII character 'F'- total length including prefix must be 16
•
Example: 'F110123456789112'
EAN13 with 5-Digit Supplemental
•
Check digit must be included in label data and is assumed to be correct
•
Prefix must be an ASCII character 'F'- total length including prefix must be 19
•
Example: 'F110123456789112345'
EAN13 with Code128 Supplemental
•
Check digit must be included in label data and is assumed to be correct
•
Supplemental data is appended to base label
•
Prefix must be an ASCII character 'F'- total length including prefix must be greater or
equal to 20 (code 128 supplemental codes are variable length having a minimum of 2
data characters)
•
Characters immediately following base label must be of the form '8100', '8101' or
'8102'
•
Example: 'F11012345678918100000951'
Code 39
•
Check character must be included in label data
•
Label length including start, stop and check characters and excluding prefix character
must meet requirements imposed by the main scanner's fixed or variable label length
control for this symbology type.
•
Start and stop characters "*" must be included in label
•
Prefix must be an ASCII character '*'
430
Magellan™ 9800i Scanner