Check Character Transmission - Datalogic Magellan 9800i Product Reference Manual

Datalogic magellan 9800i sacnner

Hide thumbs Also See for Magellan 9800i:

Table of Contents

Enter/Exit Programming Mode

EAN-8 Check Character Transmission

Enables/disables transmission of an EAN/JAN-8 check character.

To set this feature:

1. Scan the Enter/Exit Programming Mode bar code.

2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes

3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar

EAN-8 Check Character Transmission = Enable

This item is ignored when the advanced feature, Full Label Edit, is

on this and the facing page to ensure that the scanner reads only the bar code you intend

EAN-8 Check Character Transmission = Disable

Magellan™ 9800i Scanner

Show Quick Links

Table of Contents