UPC/EAN Stitch Unlike Label Halves
This setting enables the stitching of two UPC-A/EAN-13 label halves together that may have
different characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
054201(CR)
UPC/EAN Stitch Unlike Label Halves = Enable
Product Reference Guide
Enter/Exit Programming Mode
054200(CR)
UPC/EAN Stitch Unlike Label Halves = Disable
267