Standard 2 of 5 Enable
Enables/disables the ability of the scanner to decode Standard 2 of 5 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
049401(CR)
Standard 2 of 5 = Enable
Product Reference Guide
Enter/Exit Programming Mode
049400(CR)
Standard 2 of 5 = Disable
357