Controls And Indicators - Datalogic Magellan 9800i Product Reference Manual

Controls and Indicators

Figure 58
As
buttons and more LED indicators. Additionally, a configurable speaker is used to sound
scanning, weighing and EAS deactivation indications.
Figure 58. Control Buttons and Indicator LEDs
1
Scale Zero Button
With all weight removed from the scale, push this
button to set the scale to zero.
2
Manual EAS Deactivation Button
When in EAS Manual Deactivation Mode, push
this button to deactivate an item.
3
ScaleSentry / Scale Service Button
Performs ScaleSentry and Scale Service functions
depending on the duration of the button press.
ScaleSentry / Scale Service But-
See the topic
ton, in this section for more information.
4
Scale Indicator LED (Yellow)
This LED indicates scale functions. See the Indica-
tor Table for more information.
5
EAS Indicator LED (Red/Green/Orange)
This LED indicates EAS functions with red, green
OR orange color. See the Indicator Table for more
information.
a.
Some audible indications are configurable to be on or off, as well as offer their own programmable options for pitch, volume, etc.
390
illustrates, two panels on either side of the vertical scan windows contain control
1
2
3
6
ScaleSentry Indicator LED (Red)
This LED indicates the current ScaleSentry condition. See the
Beeper Indications
7
Speaker
Sounds
ScaleSentry alert, system error and other conditions.
8
Scanner Control Button
See the topic
information.
9
Camera Button
Press this button to place the scanner in Camera Mode and to take pictures
with the configured imager {either the Top Down Reader [TDR] or the Mobile
Commerce Reader).
10
Mobile Commerce Button
Press this button to place the scanner in Mobile Commerce state. Bar code(s)
can be read by the Mobile Commerce Reader while in this state.
Since audio indications are configurable, your unit may not be
programmed to sound all the indications as listed. For more
information, see the Programming section of this manual.
NOTE
4
5
6
7
section for more information.
a
beeps, error tones and other audible signals to indicate good read,
Scanner Control Button, in this section for more
8
9
10
LED and
Magellan™ 9800i Scanner