Enter/Exit Programming Mode
Expand UPC-E to EAN-13
Enables/disables expansion of UPC-E labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
040201(CR)
Expand UPC-E to EAN-13 = Enable
246
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
code.
040200(CR)
Expand UPC-E to EAN-13 = Disable
Magellan™ 9800i Scanner