Standard 2 Of 5 Stitching - Datalogic Magellan 9800i Product Reference Manual

Standard 2 of 5 Stitching

Enables/disables stitching for Standard 2 of 5 labels. When parts of a Standard 2 of 5 barcode
are presented to the scanner with this feature enabled, the barcode parts will be assembled by the
scanner's software, and the data will be decoded if all barcode proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
059201(CR)
Standard 2 of 5 Stitching = Enable
Product Reference Guide
This applies when
length decoding.
NOTE
Enter/Exit Programming Mode
Standard 2 of 5 Length Control
059200(CR)
Standard 2 of 5 Stitching = Disable
is set to fixed-
365