Codabar Minimum Read - Datalogic Magellan 9800i Product Reference Manual

Codabar Minimum Read

This feature specifies the minimum number of consecutive Codabar decodes before is accepted
as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
006C02(CR)
Codabar Minimum Read = 2
006C04(CR)
Codabar Minimum Read = 4
Product Reference Guide
Enter/Exit Programming Mode
006C01(CR)
Codabar Minimum Read = 1
006C03(CR)
Codabar Minimum Read = 3
333