Gtin Enable - Datalogic Magellan 9800i Product Reference Manual

GTIN Enable

Enables/Disables the ability to convert UPCE, UPCA, EAN8, and EAN13 labels into the
GTIN 14-character format.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
051501(CR)
GTIN = Enable
Product Reference Guide
If add-on information is present on the base label prior to the conver-
sion taking place, the add-on information will be appended to the con-
verted GTIN barcode.
NOTE
Enter/Exit Programming Mode
051500(CR)
GTIN = Disable
281