Codabar Start Stop Character Match - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Codabar Start Stop Character Match

Enables/disables the requirement that start and stop characters match.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
023201(CR)
Codabar Start Stop Character Match = Enable
330
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
023200(CR)
Codabar Start Stop Character Match = Disable
Magellan™ 9800i Scanner