Databar Expanded Length 1 - Datalogic Magellan 9800i Product Reference Manual

DataBar Expanded Length 1

Length 1 is the minimum label length if in variable length mode, or the first fixed length if in
fixed length mode. Length includes the bar code's data characters only.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
unused barcodes on this and the facing page to ensure that the scanner reads only the bar-
code you intend to scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 00 to 74. Pad all single digit numbers
with a leading zero to yield a two-digit entry (00-74).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Product Reference Guide
Set DataBar Expanded Length 1
Keypad
04BE(CR)
Enter/Exit Programming Mode
below. You'll need to cover any
Appendix C
in that represent the desired
Set DataBar Expanded Length 1
Default setting for this feature = 01
291