Led And Beeper Indications - Datalogic Heron HD3130 Quick Reference Manual

LED and Beeper Indications

Item
Mechanical Features
Weight
(without cable)
Cable Length
Decode Capability
LED and Beeper Indications
The imager's beeper sounds and its illumination flashes or changes
color to indicate various functions or errors on the reader. A "Green
Spot" also lights to indicate a good read. The tables below list these
indications. Reference the PRG for a more detailed list.
Indication
Power-up
Good Read
ROM Failure
Limited Scanning
Label Read
Imager Disabled
14
approx. 150 g (5.3 oz)
Refer to www.datalogic.com
UPC/EAN, P2 /P5 add-ons; ISBN; ISSN; GTIN, add on
2/5; Codabar; ABC Codabar; Interleaved 2/5; Code 93;
Code 128; Code 39; Code 32 (Italian Pharmacode); Code
11; Plessey; Industrial 2/5; IATA Industrial 2/5; EAN
128; Code 4; Code 5; China Post (Datalogic 2 of 5);
Standard 2 of 5; MSI; Concatenated ISBT 128
STACKED CODES: GS1 DataBar Expanded; GS1 DataBar
Limited; GS1 DataBar Omnidirectional
LED
Upper LED flashes/blinks on
power-up, however, this may
be too rapid to view. With a
USB interface, the LED blinks
until enumeration with the
host is completed.
Upper green LED comes on for
programmed time (default).
LED behavior for this indica-
tion is configurable using
Aladdin utility.
200ms on / 200ms off
N/A
The LED blinks continuously
100mS on / 900 mS off
Description
Imager beeps four times at
highest frequency and vol-
ume upon power-up.
One beep at current fre-
quency, volume, mono/bi-
tonal setting upon a suc-
cessful label scan. It is also
possible to upload custom
jingles with Aladdin.
Imager sounds one error
beep at highest volume for
200 mS.
Imager ' c hirps' six times at
the highest frequency and
current volume.
N/A
Beeper
Heron™ HD3130