Enable - Datalogic Magellan 9800i Product Reference Manual

EAN-128 Enable
Enables/disables the ability of the scanner to translate EAN128 labels to the EAN128 data
format.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
02D801(CR)
EAN-128 = Transmit EAN128 labels in EAN128 data format
Product Reference Guide
Enter/Exit Programming Mode
02D800(CR)
EAN-128 = Transmit EAN128 labels in Code128 data for-
mat
317