Datalogic Magellan 9800i Product Reference Manual page 78

Problem Isolation
Health &
Probable Cause
Status
Indicator
Scale
Remote Display
Sensormatic Interface
Control Panel
USB Device
Scale Calibration
CPLD
USB Host
Scale Configuration
66
Scale Error Reporting
See the topic
tion and corrective actions.
Connect the Remote Display. If necessary, replace display or cable. Alterna-
tively, you can disable the Remote Display using the programming proce-
Chapter 7,
dures described in
No EAS communication. Check EAS cable connections and power to the
EAS controller. Call technical support personnel.
Call technical support personnel.
Proceed to scale calibration procedure.
Call technical support personnel.
Try resetting the scanner. If the problem persists, unplug the unit and call
technical support personnel.
Scale Error Reporting
See the topic
tion and corrective actions.
Corrective Action
in this section for problem identifica-
Programming.
in this section for problem identifica-
Magellan™ 9800i Scanner