Datalogic Magellan 9800i Product Reference Manual page 287

P2 Addon Minimum Read
This feature specifies the minimum number of times a P2 addon must decode before it is
marked valid.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the barcode representing the desired option on this and the following page. You'll
need to cover any unused barcodes on facing pages to ensure that the scanner reads only
the barcode you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
005F03(CR)
P2 Addon Minimum Read = 3
005F05(CR)
P2 Addon Minimum Read = 5
Product Reference Guide
Enter/Exit Programming Mode
005F02(CR)
P2 Addon Minimum Read = 2
005F04(CR)
P2 Addon Minimum Read = 4
005F06(CR)
P2 Addon Minimum Read = 6
275