Code 39 Full ASCII
Enables/disables the ability of the scanner to translate to Code 39 full ASCII labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
022F01(CR)
Code 39 Full ASCII = Enable
Product Reference Guide
Enter/Exit Programming Mode
022F00(CR)
Code 39 Full ASCII = Disable
297