Datalogic Magellan 9800i Product Reference Manual page 71

3. Either vertical window can be pressed out of its frame as shown in #3 of
Figure 38. Vertical Scan Window Removal/Replacement
1
1
2
4. Carefully align the new vertical scan window its window frame. Push in and upwards to
5. Reinstall the wedge-shaped plastic piece (#2 in
6. Clean both sides of the Vertical Scan Window using a paper towel or lint free cleaning tis-
7. Reinstall the platter. Vertical Scan Window replacement is now complete.
Product Reference Guide
fully dispose of any damaged glass (#4 of
Push in to release 6 tabs
Lift off the wedge-shaped plastic
piece
seat the window in the frame and secure it in place.
firmly over the entire surface to engage all six snaps and three detents along each side
where the plastic and stainless steel bezel are joined.
sues dampened with a mild, water-based glass cleaner. DO NOT use abrasive cleaners or
pads.
Figure 38
).
2
3
Press window(s) in or out of the frame
3
Carefully dispose of the damaged glass
4
Figure 38
Figure 38
4
), pushing down gently but
. Care-
59