Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 9800i Product Reference Manual

QR Code Length 1, Length 2 Programming Instructions

If QR Code Length Control is set to Fixed-Length decoding, this feature specifies QR Code
first fixed length. If QR Code Length Control is set to Variable-Length decoding, this feature
specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
to cover any unused barcodes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 0001 to 2710. Pad all numbers with
leading zeros to yield a four-digit entry (001-02710).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
Default setting for this feature = 0001
03DB(CR)
Set QR Code Length 2
Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or
the first fixed length if in fixed length mode. Length 2 is the maxi-
mum label length if in variable length mode, or the second fixed
length if in fixed length mode. Length includes the barcode's data
characters only. Any value > 2710 will be considered to be 2710.
NOTE
Set QR Code Length 1
Enter/Exit Programming Mode
Set QR Code Length 2
or
Keypad Appendix C
in that represent the desired
03DA(CR)
Set QR Code Length 1
Default setting for this feature = 2710
below. You'll need
381