Datalogic Magellan 9800i Product Reference Manual page 98

Calibration Procedures
Shift Test Metric (2 Kilogram Dual Interval ONLY)
The Shift Test checks to ensure that items placed anywhere on the weighing surface of the
scanner/scale are weighed properly. Refer to
Figure 54. Metric Shift Test
86
Figure 54
1. Place and remove, in succession, a 2 kilogram
load on the center of each of the four quadrants:
2, 3, 4, and 5, and in the center (1) of the scan-
ner/scale's weighing platform (see
Verify that the Remote Display shows a reading
of between 1.998 and 2.002 kg for each quad-
rant/center test. Check that the display returns to
0.000 between each load.
2. After verifying the accuracy of each quadrant
and the center of the weighing surface, remove
all weight from the scale. This completes the
Shift Test Metric (2 Kilogram).
(Models vary)
when performing this test.
DUAL INTERVAL
Figure
2 3
1
5 4
Magellan™ 9800i Scanner
54).