UPC-E Minimum Read
This feature specifies the minimum number of consecutive UPC-E decodes before is accepted as
good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
006202(CR)
UPC-E Minimum Read = 2
006204(CR)
UPC-E Minimum Read = 4
Product Reference Guide
Enter/Exit Programming Mode
006201(CR)
UPC-E Minimum Read = 1
006203(CR)
UPC-E Minimum Read = 3
247