Codabar Require Margins
Enables/disables the requirement that quiet zones be present in a Codabar bar code.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
068D01(CR)
Codabar Require Margins = Quiet Zones Required
Product Reference Guide
Enter/Exit Programming Mode
068D00(CR)
Codabar Require Margins = Quiet Zones Not Required
339