Managing The Videoconference From An Scopia Xt Series Endpoint - RADVision SCOPIA XT4000 Series User Manual

Managing the Videoconference from an SCOPIA XT Series Endpoint

When you use the SCOPIA XT Series as an endpoint, you can manage conferences hosted by
another endpoint. This functionality is only available if the hosting endpoint supports remote
videoconference management via H.243.
You can manage videoconferences from the endpoint itself, or remotely using the web
interface.
Note
If the endpoint hosting the meeting does not support H.243, required to remotely manage the
videoconference, the Meeting option in the in-call menu is not available (see
page
Alternatively, to use the SCOPIA XT Series as an MCU, see
from the SCOPIA XT Series MCU Edition" on page
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
49).
Access the meeting settings as follows:
•
From the endpoint, press
•
From the web interface, select Make your call > Meeting.
Figure 6-6
Select an endpoint to manage:
•
Select Make Lecturer to broadcast the video of the endpoint like a lecturer.
All participants see only the video of the selected endpoint.
•
Select Disconnect to disconnect the endpoint.
53.
> Meeting.
Meeting menu displayed on the endpoint
Figure 5-6 on
"Moderating the Videoconference
Making Videoconference Calls | 56