Setting Date And Time; Setting The Codec Unit Display Name - RADVision Scopia XT1000 Administrator's Manual

Setting Date and Time

Procedure
Step 1
Use the up and down arrow keys to navigate to the Day field. Press
Control Unit to delete the date. Enter today's date. Use the up and down arrow keys to move to
the next field.
Step 2
Repeat the procedure for the Month, Year, Hour, and Minutes.
Step 3
(Recommended) To synchronize the system with the network time, set Internet time to Yes. Then
select the relevant time zone from the drop-down list. The Day, Month, Year, Hour, and Minutes
will show the new time zone.
Step 4
(Optional) Set the Enable daylight time field to Yes.
Step 5
Set the Start (dd/mm) and Stop (dd/mm) fields to indicate when daylight saving times start and
end.
Step 6
Press

Setting the Codec Unit Display Name

Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2
Press
Step 3
Navigate to Page 5/6.
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Next.
Quick setup on the XT1000 Remote Control Unit.
on the XT1000 Remote
'Initial Configuration' | 16