Managing Scopia Xt Series From Iview Management Suite - RADVision SCOPIA XT5000 Series Administrator's Manual

Step 3
Step 4
Step 5
Step 6
Note

Managing SCOPIA XT Series from iVIEW Management Suite

iVIEW Management Suite can manage all endpoints in a video network, including the SCOPIA
XT Series. Remote management is used for:
For more information on adding, removing and upgrading endpoint remotely in iVIEW
Management Suite, or for details on synchronizing contacts for the endpoints in your
organization, see the Administrator Guide for SCOPIA iVIEW Management Suite.
RADVISION | Administrator Guide for SCOPIA XT5000 Series Version 3.0
Figure 2-4
Enter the code in the Remote control code field.
Select Save.
On the XT Remote Control Unit, press
The On/Off key on the XT Remote Control Unit turns red.
Using the keypad, type the number you just entered in the Remote control code field.
You must always use two digits for a code. For example, to set the code to "1",
enter "01".
The code of the XT Remote Control Unit is changed and the Remote Control
new Remote Control code appear at the top of the screen.
•
Centralizing remote backups and upgrades of the configuration settings of SCOPIA XT
Series
•
Synchronizing contacts for all endpoints in a network from the corporate directory,
including SCOPIA XT Series.
Setting the XT Remote Control Unit Code
and simultaneously.
icon and the
Maintenance Tasks | 15