Setting Up A Client (Windows) Settings When Using The Netware Server - Oce im7520 User Manual

Setting Up Network Printing
6
Check the printer agent name, and then in the [NDPS Manager Name]
box, browse through the NDPS manager names, and register one.
7
In the [Gateway Types], select [Novell Printer Gateway], and then reg-
ister it.
8
In the Configure Novell PDS for Printer Agent window, select [(None)]
for the printer type and [Novell Port Handler] for the port handler type,
and then register the settings.
9
In [Connection type], select [Remote (LPR on IP)], and then register it.
10
Enter the IP address set for this machine as the host address, enter
"Print" as the printer name, and then click the [Finish] to register the
settings.
11
The printer driver registration screen appears. Select [None] for each
operating system to complete the registration.
Note
For settings for the queue user rights, printer notification option, assign-
ment of multiple queues, and passwords, refer to the NetWare documen-
tation, and set them as necessary.

Setting Up a Client (Windows) Settings When Using the NetWare Server

1
For Windows 98SE/Me/2000/NT 4.0, click the [Start], point to [Set-
tings], and then click [Printers].
For Windows XP/Server 2003, click the [Start], and then click [Printers
and Faxes].
– If [Printers and Faxes] does not appear in the Start menu, open the
Control Panel from the Start menu, select [Printers and Other Hard-
ware], and then select [Printers and Faxes].
2
For Windows 98SE/Me/2000/NT 4.0, double-click the [Add Printer]
icon.
For Windows XP/Server 2003, click [Add a printer] on the [Printer
Tasks] menu.
The "Add Printer Wizard" starts up.
3
In the port settings, browse the network, and specify the name of the
created queue (or NDPS printer name).
75/60BW-1
3
3-24