Skip Setting For The Dr Mode Scan; D Group Skip Setting; Individual Skip Setting - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

Skip setting for the DR mode scan

You can set unnecessary repeaters as scan skip tar-
gets. The selected repeaters are skipped during scan-
ning for faster selection and scanning.
You can set the skip setting to all repeaters in the se-
lected repeater group, or the individual repeater.
When a repeater is specified as a skip target, its
"USE (FROM)" setting is automatically set to "NO." In
this case, the repeater cannot be selected in "FROM"
(Access repeater).
D Individual skip setting
Push (C) to enter the Set mode.
q
SET
Touch the "Repeater List" item of the "DV Memory"
w
Set mode.
DV Memory > Repeater List
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
• The repeater groups are displayed.
Touch the repeater group that includes the repeater
e
you want to set the skip setting on.
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
Touch the repeater to be skipped during the DR
r
mode scan.
Touch the repeater to be skipped for 1 second.
t
Touch "SKIP."
y
• "SKIP" appears on the selected repeater.
• Push (C) and select "SKIP" again to cancel the
QUICK
skip setting.
• When "SKIP All ON" is selected, touch to set all repeaters
in the group as skip targets.

D Group skip setting

Push (C) to enter the Set mode.
q
SET
Touch the "Repeater List" item of the "DV Memory"
w
Set mode.
DV Memory > Repeater List
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
• The repeater groups are displayed.
Touch the repeater group to be skipped during the
e
DR mode scan for 1 second.
Touch "SKIP All ON."
r
• "SKIP" appears on the selected repeater group.
• Push (C) again and select "SKIP All OFF," then
QUICK
touch to cancel the skip setting.
.
.
.
9-42
Touch
"Repeater List."
Select the
repeater group.
Touch the
repeater for
1 second.
Select the re-
peater to set
the skip setting
Touch "SKIP."
Appears
Touch the
repeater group
for 1 second.
Touch
"SKIP All ON."
Appears