D Turning On The Rtty Decode Log - Icom IC-7100 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT
The functions for RTTY operation (Continued)

D Turning ON the RTTY decode log

Turn ON the RTTY decode log to store your RTTY op-
erating record, both TX and RX, into an SD card.
Be sure to insert the SD card, otherwise this function
does not work properly. The SD card is not supplied by
Icom.
q In the RTTY mode, push
times to select the "M-2" screen (M-2 menu).
Touch [DEC]( D) to display the RTTY decoder
w
screen.
• Touch [WIDE](D) to toggle the decode screen size be-
tween normal and wide.
Touch [<1>]( D) to display the RTTY decoder (2)
e
screen.
• Touch [<1>] or [<2>](D) to toggle between the RTTY de-
coder and the RTTY decode (2) screens.
Touch [LOG]( D) to display the "RTTY DECODE
r
LOG" screen.
Touch "Decode Log," and then select the RTTY de-
t
code log function ON or OFF.
• If desired, touch the item for 1 second to open the Default
set window, then select "Default" to reset to the default
setting.
• When "ON" is selected, the RTTY decode log starts.
Touch [ ](D) or push
y
RTTY Decoder screen.
(C) one or more
MENU
(C) to return to the
MENU
L eft D isplay
C enter
• RTTY decode log
4-19
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
SD card icon
Touch [LOG]
Touch "Decode
Log"
Touch "ON"