Icom IC-7100 Advanced Instructions page 137
Hf/vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-7100:
- Service manual addendum (294 pages) ,
- Instruction manual (197 pages) ,
- Basic manual (96 pages)
Table of Contents
Advertisement
Previous view
8
D-STAR OPERATION <BASIC>
D-STAR Operating procedures (Continued)
< Communication example for a Gateway call>
JA3YUA
JP1YIU port A through
JP3YHH port B.
JA3YUA, this is JM1ZLK.
Hello, how are you?
8-5
INTERNET
calling
to
•
•
•
JM1ZLK,
this
is
JA3YUA.
Thanks for the nice QSO and I
hope to talk to you again soon.
This is JA3YUA now clear of
the JP3YHH repeater.
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IC-7100 and is the answer not in the manual?
Questions and answers
IC-7100 is two months old. Power suddenly cut off. Fuses are OK. No obvious damage internally. Can something with the control head cause unit not to power up?
Yes, a control head issue can cause the Icom IC-7100 to not power up. The control head receives power through the extension cable with shielded RJ45 connectors. If there is high resistance in the power wires or a poor connection in the umbilical cable, it may prevent the control head from receiving enough power to function properly. Reseating both connectors may help resolve the issue.
This answer is automatically generated
re ICOM 7100. Digital mode operations leave the mike path inoperable. What protocols are required on the DV USB computer/transceiver cable? Transceiver control head display shows USB-D when the intent is USB.
How do I find the IO settings