D Sing The Preloaded Repeater List - Icom IC-7100 Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>
"FROM" (Access repeater) setting (Continued)
D Using the preloaded repeater list
When your access repeater is preloaded in your trans-
ceiver's repeater list, you can select it from the repeater
list.
By only selecting the repeater from the list, the call
sign, frequency, duplex and offset frequency settings
are automatically set for easy operation.
Example: Select the "Hirano" repeater in Japan from
the repeater list.
Push (C) to select the DR mode.
q
DR
Check whether or not "FROM" is selected.
w
• If "FROM" is not selected, touch the "FROM" field.
Touch the "FROM" field.
e
• The "FROM SELECT" screen appears.
Touch "Repeater List."
r
• The "REPEATER GROUP" screen appears.
Touch the repeater group where your access repeat-
t
er is listed. (Example: "11: Japan")
Touch your access repeater to select the repeater
y
area or name. (Example: "Hirano")
• The transceiver returns to the DR mode screen, and the
selected repeater is set in "FROM."
L eft D isplay R ight
C enter
How to switch the repeater group:
To switch the repeater group, while in the DR mode,
➥
push (C), and then touch "Group Select"
QUICK
The repeater list, described in this manual, may dif-
fer from your transceiver's preloaded list.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
"FROM" is selected.
Repeater area
(Sub name)
"Hirano" is set on "FROM."
8-9
Touch
"FROM."
Touch
"Repeater List."
Touch the re-
peater group
( Example:
"11: Japan")
Touch your ac-
cess repeater.
( Example:
"Hirano")
Repeater call sign