Editing A Repeater List - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

Editing a repeater list

This function reprograms a repeater's data. This is use-
ful when already-programmed data is incorrect, has
changed or some data should be added to the list.
Push (C) to enter the Set mode.
q
SET
Touch the "Repeater List" item of the "DV Memory"
w
Set mode.
DV Memory > Repeater List
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
• The repeater groups are displayed.
e Touch to select the desired repeater
[∫] or [√](D)
group to be programmed.
• The repeater list of the selected repeater group is dis-
played.
r Push (C).
QUICK
t Touch [Edit] .
(D)
"
• The REPEATER LIST EDIT
• See pages 9-30 to 9-37 for programming details.
y Touch "<<Overwrite>>."
Touch [YES](
u D).
• The programmed contents are stored to the repeater list,
and the display returns to the RPT LIST screen.
L eft D isplay R ight
C enter
.
"
screen is displayed.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
9-38
Touch
"<<Over
Write>>"
Touch [YES]
Example:
"East Tokyo" is
edited.